- Couplings can be connected smoothly
- Slim and neat piping with an in-line design
- Working pressure is high pressure up to 35 MPa

Application : R 1(Male thread) x Rc 1(Female thread)
Drain outlet port : Application: Rc 1/8 (Max. Tightening Torque: 5 Nm)

*Tube fittings are not included. Please purchase them separately.

Bài viết PURGE ADAPTER PAD-6FM STEEL NBR đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

- Couplings can be connected smoothly
- Slim and neat piping with an in-line design
- Working pressure is high pressure up to 35 MPa

Application : R 1(Male thread) x Rc 1(Female thread)
Drain outlet port : Application: Rc 1/8 (Max. Tightening Torque: 5 Nm)

*Tube fittings are not included. Please purchase them separately.

Bài viết PURGE ADAPTER PAD-4FM STEEL NBR đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

- Couplings can be connected smoothly
- Slim and neat piping with an in-line design
- Working pressure is high pressure up to 35 MPa

Application : R 1(Male thread) x Rc 1(Female thread)
Drain outlet port : Application: Rc 1/8 (Max. Tightening Torque: 5 Nm)

*Tube fittings are not included. Please purchase them separately.

Bài viết PURGE ADAPTER PAD-3FM STEEL NBR đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

- Couplings can be connected smoothly
- Slim and neat piping with an in-line design
- Working pressure is high pressure up to 35 MPa

Application : R 1(Male thread) x Rc 1(Female thread)
Drain outlet port : Application: Rc 1/8 (Max. Tightening Torque: 5 Nm)

*Tube fittings are not included. Please purchase them separately.

Bài viết PURGE ADAPTER PAD-8FM STEEL NBR đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-Smooth and easy connection of large Cupla by operating a lever.
-List of Applicable Models
SP Cupla Type A 8SP-A 10SP-A 12SP-A 16SP-A
Zerospill Cupla ZEL-8SP
HSP Cupla 8HSP 10HSP 12HSP 16HSP
210 Cupla 210-8SP
HSU Cupla HSU-8SP
S210 Cupla S210-8SP
280 Cupla 280-8SP
350 Cupla 350-8SP 350-10SP 350-12SP
Flat Face Cupla F35 F35-8SP
Flat Face Cupla FF FF-8SP
Semicon Cupla SP Type 8SP-304
Semicon Cupla SCS Type SCS-8SP
Semicon Cupla SCY Type SCY-8SP
Semicon Cupla SCT Type SCT-8SP
Semicon Cupla SCAL Type SCAL-8SP SCAL-12SP

Bài viết CUPLA CONNECTING JIG CJ-1 đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-No hose clamp is required resulting in reduced risk of injuries to
fingers or palms.
-Deterioration of the braided hose at the hose barb part has been eliminated.
-Unique nut construction increases the pulling load of braided hoses.
-Simply push a braided hose onto the hose barb to the end and tighten the nut until it is flush against the hose barb base.
-No inner parts for conventional braided hose fittings are required.
Thus incorrect assembling does not occur.

Bài viết CUPLA ADAPTER FOR BRAIDED HOSE CONNECTION BH190-6M BRASS đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-No hose clamp is required resulting in reduced risk of injuries to
fingers or palms.
-Deterioration of the braided hose at the hose barb part has been eliminated.
-Unique nut construction increases the pulling load of braided hoses.
-Simply push a braided hose onto the hose barb to the end and tighten the nut until it is flush against the hose barb base.
-No inner parts for conventional braided hose fittings are required.
Thus incorrect assembling does not occur.

Bài viết CUPLA ADAPTER FOR BRAIDED HOSE CONNECTION BH150-4M BRASS đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-No hose clamp is required resulting in reduced risk of injuries to
fingers or palms.
-Deterioration of the braided hose at the hose barb part has been eliminated.
-Unique nut construction increases the pulling load of braided hoses.
-Simply push a braided hose onto the hose barb to the end and tighten the nut until it is flush against the hose barb base.
-No inner parts for conventional braided hose fittings are required.
Thus incorrect assembling does not occur.

Bài viết CUPLA ADAPTER FOR BRAIDED HOSE CONNECTION BH120-4M BRASS đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-No hose clamp is required resulting in reduced risk of injuries to
fingers or palms.
-Deterioration of the braided hose at the hose barb part has been eliminated.
-Unique nut construction increases the pulling load of braided hoses.
-Simply push a braided hose onto the hose barb to the end and tighten the nut until it is flush against the hose barb base.
-No inner parts for conventional braided hose fittings are required.
Thus incorrect assembling does not occur.

Bài viết CUPLA ADAPTER FOR BRAIDED HOSE CONNECTION BH90-3M BRASS đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

Application           : R 1/4
Drain outlet port : For 8 mm OD tube

*Tube fitting included.

Bài viết PURGE ADAPTER PAD-2 STEEL NBR đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.