Bài viết MULTI CUPLA MALC-01 TYPE MALC-01TP-FL BRASS N đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

Bài viết MULTI CUPLA MALC-01 TYPE MALC-01S-FL BRASS NB đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

Bài viết MULTI CUPLA MALC-01 TYPE MALC-01TP BRASS NBR đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

Bài viết MULTI CUPLA MALC-01 TYPE MALC-01S BRASS NBR đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-Compared with conventional Multi Cuplas, approximately double flow rates are realized.
This could reduce the size of required plates.(Rate of flow increase depends on Cupla sizes.)
-The MALC type realizes a 2 mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6 mm.
-Special valve design enables connection of socket and plug under dynamic pressure of up to 8 MPa.
-When connected, the distance between the socket plate and plug plate is designed to be 30 mm for all sizes. This means any size of Cupla can be mounted and used on the same plate.
-Low spill valves minimize outflow of fluid and admixture of air into the fluid line.

Bài viết MULTI CUPLA MALC-HSP TYPE MALC-6HS STEEL FKM đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-Compared with conventional Multi Cuplas, approximately double flow rates are realized.
This could reduce the size of required plates.(Rate of flow increase depends on Cupla sizes.)
-The MALC type realizes a 2 mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6 mm.
-Special valve design enables connection of socket and plug under dynamic pressure of up to 8 MPa.
-When connected, the distance between the socket plate and plug plate is designed to be 30 mm for all sizes. This means any size of Cupla can be mounted and used on the same plate.
-Low spill valves minimize outflow of fluid and admixture of air into the fluid line.

Bài viết MULTI CUPLA MALC-HSP TYPE MALC-4HP STEEL FKM đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-Compared with conventional Multi Cuplas, approximately double flow rates are realized.
This could reduce the size of required plates.(Rate of flow increase depends on Cupla sizes.)
-The MALC type realizes a 2 mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6 mm.
-Special valve design enables connection of socket and plug under dynamic pressure of up to 8 MPa.
-When connected, the distance between the socket plate and plug plate is designed to be 30 mm for all sizes. This means any size of Cupla can be mounted and used on the same plate.
-Low spill valves minimize outflow of fluid and admixture of air into the fluid line.

Bài viết MULTI CUPLA MALC-HSP TYPE MALC-4HS STEEL FKM đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-Compared with conventional Multi Cuplas, approximately double flow rates are realized.
This could reduce the size of required plates.(Rate of flow increase depends on Cupla sizes.)
-The MALC type realizes a 2 mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6 mm.
-Special valve design enables connection of socket and plug under dynamic pressure of up to 8 MPa.
-When connected, the distance between the socket plate and plug plate is designed to be 30 mm for all sizes. This means any size of Cupla can be mounted and used on the same plate.
-Low spill valves minimize outflow of fluid and admixture of air into the fluid line.

Bài viết MULTI CUPLA MALC-HSP TYPE MALC-3HP STEEL FKM đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-Compared with conventional Multi Cuplas, approximately double flow rates are realized.
This could reduce the size of required plates.(Rate of flow increase depends on Cupla sizes.)
-The MALC type realizes a 2 mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6 mm.
-Special valve design enables connection of socket and plug under dynamic pressure of up to 8 MPa.
-When connected, the distance between the socket plate and plug plate is designed to be 30 mm for all sizes. This means any size of Cupla can be mounted and used on the same plate.
-Low spill valves minimize outflow of fluid and admixture of air into the fluid line.

Bài viết MULTI CUPLA MALC-HSP TYPE MALC-3HS STEEL FKM đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-Compared with conventional Multi Cuplas, approximately double flow rates are realized.
This could reduce the size of required plates.(Rate of flow increase depends on Cupla sizes.)
-The MALC type realizes a 2 mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6 mm.
-Special valve design enables connection of socket and plug under dynamic pressure of up to 8 MPa.
-When connected, the distance between the socket plate and plug plate is designed to be 30 mm for all sizes. This means any size of Cupla can be mounted and used on the same plate.
-Low spill valves minimize outflow of fluid and admixture of air into the fluid line.

Bài viết MULTI CUPLA MALC-HSP TYPE MALC-2HP STEEL FKM đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.