-Compared with conventional Multi Cuplas, approximately double flow rates are realized.
-This could reduce the size of required plates.(Rate of flow increase depends on Cupla sizes.)
-The MALC type realizes a 2 mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6 mm.
-Special valve design enables connection of socket and plug under pressure of up to 2 MPa. (up to 1.5 MPa for MALC-12SP.)
-When connected, the distance between the socket plate and the plug plate is designed to be 30 mm for all sizes. This means that any size of Cupla can bemounted and used on the same plate.
-Low spill valves minimize outflow of fluid and admixture of air into the fluid line. Inquiries about products

Bài viết MULTI CUPLA MALC-SP TYPE MALC-2S SUS FKM đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-Compared with conventional Multi Cuplas, approximately double flow rates are realized.
-This could reduce the size of required plates.(Rate of flow increase depends on Cupla sizes.)
-The MALC type realizes a 2 mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6 mm.
-Special valve design enables connection of socket and plug under pressure of up to 2 MPa. (up to 1.5 MPa for MALC-12SP.)
-When connected, the distance between the socket plate and the plug plate is designed to be 30 mm for all sizes. This means that any size of Cupla can bemounted and used on the same plate.
-Low spill valves minimize outflow of fluid and admixture of air into the fluid line. Inquiries about products

Bài viết MULTI CUPLA MALC-SP TYPE MALC-3P SUS FKM đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-Compared with conventional Multi Cuplas, approximately double flow rates are realized.
-This could reduce the size of required plates.(Rate of flow increase depends on Cupla sizes.)
-The MALC type realizes a 2 mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6 mm.
-Special valve design enables connection of socket and plug under pressure of up to 2 MPa. (up to 1.5 MPa for MALC-12SP.)
-When connected, the distance between the socket plate and the plug plate is designed to be 30 mm for all sizes. This means that any size of Cupla can bemounted and used on the same plate.
-Low spill valves minimize outflow of fluid and admixture of air into the fluid line. Inquiries about products

Bài viết MULTI CUPLA MALC-SP TYPE MALC-3S SUS FKM đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-Compared with conventional Multi Cuplas, approximately double flow rates are realized.
-This could reduce the size of required plates.(Rate of flow increase depends on Cupla sizes.)
-The MALC type realizes a 2 mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6 mm.
-Special valve design enables connection of socket and plug under pressure of up to 2 MPa. (up to 1.5 MPa for MALC-12SP.)
-When connected, the distance between the socket plate and the plug plate is designed to be 30 mm for all sizes. This means that any size of Cupla can bemounted and used on the same plate.
-Low spill valves minimize outflow of fluid and admixture of air into the fluid line. Inquiries about products

Bài viết MULTI CUPLA MALC-SP TYPE MALC-2P SUS FKM đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-Compared with conventional Multi Cuplas, approximately double flow rates are realized.
-This could reduce the size of required plates.(Rate of flow increase depends on Cupla sizes.)
-The MALC type realizes a 2 mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6 mm.
-Special valve design enables connection of socket and plug under pressure of up to 2 MPa. (up to 1.5 MPa for MALC-12SP.)
-When connected, the distance between the socket plate and the plug plate is designed to be 30 mm for all sizes. This means that any size of Cupla can bemounted and used on the same plate.
-Low spill valves minimize outflow of fluid and admixture of air into the fluid line. Inquiries about products

Bài viết MULTI CUPLA MALC-SP TYPE MALC-6P SUS FKM đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-Compared with conventional Multi Cuplas, approximately double flow rates are realized.
-This could reduce the size of required plates.(Rate of flow increase depends on Cupla sizes.)
-The MALC type realizes a 2 mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6 mm.
-Special valve design enables connection of socket and plug under pressure of up to 2 MPa. (up to 1.5 MPa for MALC-12SP.)
-When connected, the distance between the socket plate and the plug plate is designed to be 30 mm for all sizes. This means that any size of Cupla can bemounted and used on the same plate.
-Low spill valves minimize outflow of fluid and admixture of air into the fluid line. Inquiries about products

Bài viết MULTI CUPLA MALC-SP TYPE MALC-6S SUS FKM đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-Compared with conventional Multi Cuplas, approximately double flow rates are realized.
-This could reduce the size of required plates.(Rate of flow increase depends on Cupla sizes.)
-The MALC type realizes a 2 mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6 mm.
-Special valve design enables connection of socket and plug under pressure of up to 2 MPa. (up to 1.5 MPa for MALC-12SP.)
-When connected, the distance between the socket plate and the plug plate is designed to be 30 mm for all sizes. This means that any size of Cupla can bemounted and used on the same plate.
-Low spill valves minimize outflow of fluid and admixture of air into the fluid line. Inquiries about products

Bài viết MULTI CUPLA MALC-SP TYPE MALC-4P SUS FKM đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-Compared with conventional Multi Cuplas, approximately double flow rates are realized.
-This could reduce the size of required plates.(Rate of flow increase depends on Cupla sizes.)
-The MALC type realizes a 2 mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6 mm.
-Special valve design enables connection of socket and plug under pressure of up to 2 MPa. (up to 1.5 MPa for MALC-12SP.)
-When connected, the distance between the socket plate and the plug plate is designed to be 30 mm for all sizes. This means that any size of Cupla can bemounted and used on the same plate.
-Low spill valves minimize outflow of fluid and admixture of air into the fluid line. Inquiries about products

Bài viết MULTI CUPLA MALC-SP TYPE MALC-4S SUS FKM đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-Compared with conventional Multi Cuplas, approximately double flow rates are realized.
-This could reduce the size of required plates.(Rate of flow increase depends on Cupla sizes.)
-The MALC type realizes a 2 mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6 mm.
-Special valve design enables connection of socket and plug under pressure of up to 2 MPa. (up to 1.5 MPa for MALC-12SP.)
-When connected, the distance between the socket plate and the plug plate is designed to be 30 mm for all sizes. This means that any size of Cupla can bemounted and used on the same plate.
-Low spill valves minimize outflow of fluid and admixture of air into the fluid line. Inquiries about products

Bài viết MULTI CUPLA MALC-SP TYPE MALC-6S-FL SUS FKM đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-Compared with conventional Multi Cuplas, approximately double flow rates are realized.
-This could reduce the size of required plates.(Rate of flow increase depends on Cupla sizes.)
-The MALC type realizes a 2 mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6 mm.
-Special valve design enables connection of socket and plug under pressure of up to 2 MPa. (up to 1.5 MPa for MALC-12SP.)
-When connected, the distance between the socket plate and the plug plate is designed to be 30 mm for all sizes. This means that any size of Cupla can bemounted and used on the same plate.
-Low spill valves minimize outflow of fluid and admixture of air into the fluid line. Inquiries about products

Bài viết MULTI CUPLA MALC-SP TYPE MALC-4P-FL SUS FKM đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.