C Series (Current Control Type) – nitto-kohki.vn https://nitto-kohki.vn Fri, 18 Apr 2025 14:00:26 +0000 en-US hourly 1 https://wordpress.org/?v=5.3.18 https://nitto-kohki.vn/wp-content/uploads/2019/11/cropped-logo-32x32.png C Series (Current Control Type) – nitto-kohki.vn https://nitto-kohki.vn 32 32 DLV45C12P-AYK https://nitto-kohki.vn/en/product/dlv45c12p-ayk/ https://nitto-kohki.vn/en/product/dlv45c12p-ayk/#respond Thu, 27 Feb 2020 05:34:12 +0000 http://nitto.zoomworld.vn/product/dlv45c12p-ayk/ Thirty different torque settings can be set on a single screwdriver!
* Channels and Channel patterns can be easily set with dedicated software. Download free from this website.

- Current controlled torque system
- Low-voltage brushless motor
- ESD (Electrostatic Discharge) protection structure
- For both hand-held / automated machines (External startup)
- Nine speed settings available
- Automatic three step speed control function
- Two types of measuring methods (Time/Motor rotation signal)
- Seven color indication LED (At the tip of the screwdriver)
- Two external I/O signal connection ports
(NPN and PNP switchable, RS-232C)
- Various settings can be configured via a PC
- Built-in screw counting function

Model : DLV45C12P-AYK
Starting Method : Push Start
Power Source : From dedicated Controller DCC0241X-AZ
Torque Adjustment : From 1 to 100% in 1% increments
Torque (Nm [lbf.in] : 0.6 to 4.5 [5.3 to 39.8]
Free Speed (min-1)
SOFT fastening setting : 400 - 1200
(Speed Level: 1 to 9)
HARD fastening setting : 100 - 700
(Speed Level: Automatically set
by torque setting )
Screw Size (mm)
Machine screw : 3.0 - 6.0
Tapping screw : 2.5 - 5.0
Bit Type : NK35 (OD 6.35 mm Hex.Shank)
Mass : 630 g [1.39 lbs]
Standard Accessories : Bit NK35 (No.2 X 7 X 75) : 1 pc.
Connection Cord 2m (DLW9078) : 1 pc.
Suspension Bail : 1 pc.

Bài viết DLV45C12P-AYK đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

]]> For the details of the screwdriver rotation speed, please see the Catalog.

Bài viết DLV45C12P-AYK đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

]]> https://nitto-kohki.vn/en/product/dlv45c12p-ayk/feed/ 0 Controller DCC0241X-AZ https://nitto-kohki.vn/en/product/controller-dcc0241x-az/ https://nitto-kohki.vn/en/product/controller-dcc0241x-az/#respond Thu, 27 Feb 2020 05:34:12 +0000 http://nitto.zoomworld.vn/product/controller-dcc0241x-az/ Model : DCC0241X-AZ
Input Voltage : 100-240 V AC, 50/60 Hz
Output Voltage : 40 V DC
Input Signal Method : Photocoupler input
(24V DC drive (5 mA/1 input), NPN/PNP switchable)
Output Signal Method: Photocoupler output
(30V DC or less, 30 mA/a output or less, NPN/PNP switchable)
Service Power Source: 24 V DC (Maximum capacity 200 mA)
Serial Signal Method : RS-232C
ESD (Electrostatic Discharge) Protection: Adopted (IEC61340-5-1 compliant)
Mass : 1800g [3.97 lbs]

(*): The power cord is sold separately.
Ask us for the required power cord when ordering.

Bài viết Controller DCC0241X-AZ đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

]]> For the details of the screwdriver rotation speed, please see the Catalog.

Bài viết Controller DCC0241X-AZ đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

]]> https://nitto-kohki.vn/en/product/controller-dcc0241x-az/feed/ 0 Controller DCC0101X-AZP (PNP output) https://nitto-kohki.vn/en/product/controller-dcc0101x-azp-pnp-output/ https://nitto-kohki.vn/en/product/controller-dcc0101x-azp-pnp-output/#respond Thu, 27 Feb 2020 05:34:11 +0000 http://nitto.zoomworld.vn/product/controller-dcc0101x-azp-pnp-output/ Model : DCC0101X-AZP
Input Voltage : 100-240 V AC, 50/60 Hz
Operation Channel Function : Torque and speed setting in 4-channel memory
Can switch to any operation channel
Count Function: Tracks screws fastened
Workpiece detector can be incorporated
External Start up Control Function: Start up control can be enabled by external input signal
Input Signal Method : Photocoupler input
(24V DC drive (5 mA/1 input), respond to PNP output)
Output Signal Method: Photocoupler output
(30V DC or less, 30 mA/a output or less, output method)
Service Power Source : 24 V DC (Maximum capacity 200 mA)
Power consumption: When on standby : 20W
During electric screwdriver rotation (rated) : 30W
Mass : 1100g [2.4 lbs]
Power cord (optional) (*) : DLW9220 / DLW9240 / DLW9250

(*): The power cord is sold separately.
Ask us for the required power cord when ordering.

Bài viết Controller DCC0101X-AZP (PNP output) đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

]]> For the details of the screwdriver rotation speed, please see the Catalog.

Bài viết Controller DCC0101X-AZP (PNP output) đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

]]> https://nitto-kohki.vn/en/product/controller-dcc0101x-azp-pnp-output/feed/ 0 DLV04C10L-AYK CE https://nitto-kohki.vn/en/product/dlv04c10l-ayk-ce/ https://nitto-kohki.vn/en/product/dlv04c10l-ayk-ce/#respond Thu, 27 Feb 2020 05:34:11 +0000 http://nitto.zoomworld.vn/product/dlv04c10l-ayk-ce/ - Easy fastening setting by controller
- Current Controlled Torque System suitable for screw fastening work
- Low-voltage brushless motor
- ESD (electrostatic discharge) protection structure
- For both hand-held / automatic machines
- Controller has built in counting function. Prevents human errors

Model : DLV04C10L-AYK
Power Source : Controller DCC0101X-AZP or DCC0101X-AZN
Torque Adjustment : Stepless
Torque (Nm [lbf.in]
SOFT fastening setting (1000 min-1 setting): 0.05-0.4 [0.4-3.5]
SOFT fastening setting (600 min-1 setting) : 0.05-0.35 [0.4-3.1]
HARD fastening setting : 0.05-0.4 [0.4-3.5]
Free Speed (min-1)
SOFT fastening setting : 600 - 1000
HARD fastening setting : 100 - 1000
Screw Size (mm)
Machine screw : 1.2 - 3.0
Tapping screw : 1.1 - 2.5
Bit Type : NK35 (OD 6.35 mm [1/4"] Hex. Shank) (*1)
Input Voltage : 24 V DC
Mass : 370 g [0.82 lbs]
Rated Operation : ON: 0.5 Seconds / OFF: 3.5 Seconds

(*1) Please contact us for 4 mm bit type ("M" Bit) of CE/UL models.

Bài viết DLV04C10L-AYK CE đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

]]> For the details of the screwdriver rotation speed, please see the Catalog.

Bài viết DLV04C10L-AYK CE đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

]]> https://nitto-kohki.vn/en/product/dlv04c10l-ayk-ce/feed/ 0 DLV10C10L-AYK CE https://nitto-kohki.vn/en/product/dlv10c10l-ayk-ce/ https://nitto-kohki.vn/en/product/dlv10c10l-ayk-ce/#respond Thu, 27 Feb 2020 05:34:11 +0000 http://nitto.zoomworld.vn/product/dlv10c10l-ayk-ce/ - Easy fastening setting by controller
- Current Controlled Torque System suitable for screw fastening work
- Low-voltage brushless motor
- ESD (electrostatic discharge) protection structure
- For both hand-held / automatic machines
- Controller has built in counting function. Prevents human errors

Model : DLV10C10L-AYK
Power Source : Controller DCC0101X-AZP or DCC0101X-AZN
Torque Adjustment : Stepless
Torque (Nm [lbf.in]
SOFT fastening setting (1000 min-1 setting): 0.2-1.0 [1.8-8.9]
SOFT fastening setting (600 min-1 setting) : 0.2-0.45 [1.8-4.0]
HARD fastening setting : 0.2-1.0 [1.8-8.9]
Free Speed (min-1)
SOFT fastening setting : 600 - 1000
HARD fastening setting : 100 - 1000
Screw Size (mm)
Machine screw : 1.8 - 4.0
Tapping screw : 1.6 - 3.5
Bit Type : NK35 (OD 6.35 mm [1/4"] Hex. Shank) (*1)
Input Voltage : 24 V DC
Mass : 370 g [0.82 lbs]
Rated Operation : ON: 0.5 Seconds / OFF: 3.5 Seconds

(*1) Please contact us for 4 mm bit type ("M" Bit) of CE/UL models.

Bài viết DLV10C10L-AYK CE đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

]]> For the details of the screwdriver rotation speed, please see the Catalog.

Bài viết DLV10C10L-AYK CE đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

]]> https://nitto-kohki.vn/en/product/dlv10c10l-ayk-ce/feed/ 0 Controller DCC0101X-AZN (NPN output) https://nitto-kohki.vn/en/product/controller-dcc0101x-azn-npn-output/ https://nitto-kohki.vn/en/product/controller-dcc0101x-azn-npn-output/#respond Thu, 27 Feb 2020 05:34:11 +0000 http://nitto.zoomworld.vn/product/controller-dcc0101x-azn-npn-output/ Model : DCC0101X-AZN
Input Voltage : 100-240 V AC, 50/60 Hz
Operation Channel Function : Torque and speed setting in 4-channel memory
Can switch to any operation channel
Count Function : Tracks screws fastened
Workpiece detector can be incorporated
External Start up Control Function : Start up control can be enabled by external input signal
Input Signal Method : Photocoupler input
(24V DC drive (5 mA/1 input), respond to PNP output)
Output Signal Method: Photocoupler output
(30V DC or less, 30 mA/a output or less, output method)
Service Power Source : 24 V DC (Maximum capacity 200 mA)
Power consumption
: When on standby : 20W
During electric screwdriver rotation (rated) : 30W
Mass : 1100g [2.4 lbs]
Power cord (optional) (*) : DLW9220 / DLW9240 / DLW9250

(*): The power cord is sold separately.
Ask us for the required power cord when ordering.

Bài viết Controller DCC0101X-AZN (NPN output) đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

]]> For the details of the screwdriver rotation speed, please see the Catalog.

Bài viết Controller DCC0101X-AZN (NPN output) đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

]]> https://nitto-kohki.vn/en/product/controller-dcc0101x-azn-npn-output/feed/ 0 DLV04C10L-AZM https://nitto-kohki.vn/en/product/dlv04c10l-azm/ https://nitto-kohki.vn/en/product/dlv04c10l-azm/#respond Thu, 27 Feb 2020 05:34:11 +0000 http://nitto.zoomworld.vn/product/dlv04c10l-azm/ - Easy fastening setting by controller
- Current Controlled Torque System suitable for screw fastening work
- Low-voltage brushless motor
- ESD (electrostatic discharge) protection structure
- For both hand-held / automatic machines
- Controller has built in counting function. Prevents human errors

Model : DLV04C10L-AZM
Power Source : Controller DCC0101X-AZP or DCC0101X-AZN
Torque Adjustment : Stepless
Torque (Nm [lbf.in]
SOFT fastening setting (1000 min-1 setting): 0.05-0.4 [0.4-3.5]
SOFT fastening setting (600 min-1 setting) : 0.05-0.35 [0.4-3.1]
HARD fastening setting : 0.05-0.4 [0.4-3.5]
Free Speed (min-1)
SOFT fastening setting : 600 - 1000
HARD fastening setting : 100 - 1000
Screw Size (mm)
Machine screw : 1.2 - 3.0
Tapping screw : 1.1 - 2.5
Bit Type : NK4D (OD 4 mm Shank)
Input Voltage : 24 V DC
Mass : 370 g [0.82 lbs]
Rated Operation : ON: 0.5 Seconds / OFF: 3.5 Seconds

Please contact us for 4 mm bit type ("M" Bit) of CE/UL models.

Bài viết DLV04C10L-AZM đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

]]> For the details of the screwdriver rotation speed, please see the Catalog.

Bài viết DLV04C10L-AZM đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

]]> https://nitto-kohki.vn/en/product/dlv04c10l-azm/feed/ 0 DLV10C10L-AZM https://nitto-kohki.vn/en/product/dlv10c10l-azm/ https://nitto-kohki.vn/en/product/dlv10c10l-azm/#respond Thu, 27 Feb 2020 05:34:11 +0000 http://nitto.zoomworld.vn/product/dlv10c10l-azm/ - Easy fastening setting by controller
- Current Controlled Torque System suitable for screw fastening work
- Low-voltage brushless motor
- ESD (electrostatic discharge) protection structure
- For both hand-held / automatic machines
- Controller has built in counting function. Prevents human errors

Model : DLV10C10L-AZM
Power Source : Controller DCC0101X-AZP or DCC0101X-AZN
Torque Adjustment : Stepless
Torque (Nm [lbf.in]
SOFT fastening setting (1000 min-1 setting): 0.2-1.0 [1.8-8.9]
SOFT fastening setting (600 min-1 setting) : 0.2-0.45 [1.8-4.0]
HARD fastening setting : 0.2-1.0 [1.8-8.9]
Free Speed (min-1)
SOFT fastening setting : 600 - 1000
HARD fastening setting : 100 - 1000
Screw Size (mm)
Machine screw : 1.8 - 4.0
Tapping screw : 1.6 - 3.5
Bit Type : NK4D (OD 4 mm Shank)
Input Voltage : 24 V DC
Mass : 370 g [0.82 lbs]
Rated Operation : ON: 0.5 Seconds / OFF: 3.5 Seconds

Please contact us for 4 mm bit type ("M" Bit) of CE/UL models.

Bài viết DLV10C10L-AZM đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

]]> For the details of the screwdriver rotation speed, please see the Catalog.

Bài viết DLV10C10L-AZM đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

]]> https://nitto-kohki.vn/en/product/dlv10c10l-azm/feed/ 0 DLV45C12L-AYK https://nitto-kohki.vn/en/product/dlv45c12l-ayk/ https://nitto-kohki.vn/en/product/dlv45c12l-ayk/#respond Thu, 27 Feb 2020 05:34:11 +0000 http://nitto.zoomworld.vn/product/dlv45c12l-ayk/ Thirty different torque settings can be set on a single screwdriver!

- Current controlled torque system
- Low-voltage brushless motor
- ESD (Electrostatic Discharge) protection structure
- For both hand-held / automated machines (External startup)
- Nine speed settings available
- Automatic three step speed control function
- Two types of measuring methods (Time/Motor rotation signal)
- Seven color indication LED (At the tip of the screwdriver)
- Two external I/O signal connection ports
(NPN and PNP switchable, RS-232C)
- Various settings can be configured via a PC
(* Free setting software download site is underconstruction.)
- Built-in screw counting function

Model : DLV45C12L-AYK
Starting Method : Lever Start
Power Source : From dedicated Controller DCC0241X-AZ
Torque Adjustment : From 1 to 100% in 1% increments
Torque (Nm [lbf.in] : 0.6 to 4.5 [5.3 to 39.8]
Free Speed (min-1)
SOFT fastening setting : 400 - 1200
(Speed Level: 1 to 9)
HARD fastening setting : 100 - 700
(Speed Level: Automatically set
by torque setting )
Screw Size (mm)
Machine screw : 3.0 - 6.0
Tapping screw : 2.5 - 5.0
Bit Type : NK35 (OD 6.35 mm Hex.Shank)
Mass : 630 g [1.39 lbs]
Standard Accessories : Bit NK35 (No.2 X 7 X 75) : 1 pc.
Connection Cord 2m (DLW9078) : 1 pc.
Suspension Bail : 1 pc.

Bài viết DLV45C12L-AYK đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

]]> For the details of the screwdriver rotation speed, please see the Catalog.

Bài viết DLV45C12L-AYK đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

]]> https://nitto-kohki.vn/en/product/dlv45c12l-ayk/feed/ 0