-Locking mechanism prevents accidental disconnection after connection.
Good for connections between hoses.
-Simple one push of plug and socket to each other for connection.
Easy handling improves job efficiency.
-Ball bearing swivel mechanism prevents hose twists and relieves load
on holding hands (SNRG type).
-To mount on hose, simply slide it over the nipple and tighten the nut (SNRG type).
-Hose guard nut to prevent hose from kinking as a standard feature (SNRG type).
-Low pressure loss valve design gives improved flow rate.

Bài viết LOCK CUPLA 200 L200-40SH STEEL NBR đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-To mount on hose, simply slide it over the nipple and tighten the nut.
-The design to tighten outside of hose reduces hose slip away or fluid leaks.
-An excellent general purpose coupling for connecting factory air supply
to pneumatictools.
-Steel coupling is suitable for air.
-Steel models are heat-treated for increased strength
giving greater durability and resistance to wear.

Bài viết NUT CUPLA 200 200-110SN STEEL NBR đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

-To mount on hose, simply slide it over the nipple and tighten the nut.
-The design to tighten outside of hose reduces hose slip away or fluid leaks.
-An excellent general purpose coupling for connecting factory air supply
to pneumatictools.
-Steel coupling is suitable for air.
-Steel models are heat-treated for increased strength
giving greater durability and resistance to wear.

Bài viết NUT CUPLA 200 200-65SN STEEL NBR đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

Model : DLT1173A
Measurement Range : 4.00-12.00 Nm [35.4-106.2 lbf.in]
Calibration Presision : Within -0.5% or +0.5% (Full Scale)
Display : 4-digit digital display (Signal-line)
Data sampling : 1000 times/sec.
Display rate : 12 times/sec.
Measuring Unit : kgf / cm, Nm, lbf.in (selectable)
Data Memory : 800 pieces of data
Measuring Direction : CW and CCW
Measuring Mode : 3 modes : PD-TR-PP
Auto Power Off : Power off if left untouched for 10 minutes
External Output : As per USB out
Mitsutoyo Digimatic
Analog Output
: Approx. 1.1 V max.
No zero offset; indentical waveforms produced in PP, PD and TR models
Continuous Operation Time : 20 hours
External Dimensions (mm[inch]) : W200 x D112 x H48.5
[W7.9" x D4.41" x H1.89"]
Mass (g[lbs]) : 1400 [3.09]
Rechargeable Battery : Nickel metal hydride battery
Charger Type : DLE1833A
Input Voltage for Charger : 100-240 V AC, 50/60 Hz
Charging Time : 4 hours
Standard Accessories : Screw Joint (DLW4000)
Available as option : Hard Joint (DLW4040)

Applicable Screwdriver
- DLV45A/70A, DLV45S/70S, DLV45A/70A (automation)

Bài viết Torque Checker DLT1973A 100-230V CE đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

Model : DLT1673A
Measurement Range : 0.15-10.00 Nm [1.33-88.5 lbf.in]
Calibration Presision : Within -0.5% or +0.5% (Full Scale)
For 2 Nm [20 lbf.in] or less -1 or +1 digit
Display : 4-digit digital display (Signal-line)
Data sampling : 1000 times/sec.
Display rate : 12 times/sec.
Measuring Unit : kgf / cm, Nm, lbf.in (selectable)
Data Memory : 800 pieces of data
Measuring Direction : CW and CCW
Measuring Mode : 3 modes : PD-TR-PP
Auto Power Off : Power off if left untouched for 10 minutes
External Output : As per USB out
Mitsutoyo Digimatic
Analog Output
: Approx. 1.0 V max.
No zero offset; indentical waveforms produced in PP, PD and TR models
Continuous Operation Time : 20 hours
External Dimensions (mm[inch]) : W160 x D110 x H47
[W6.3" x D4.33" x H1.85"]
Mass (g[lbs]) : 1100 [2.43]
Rechargeable Battery : Nickel metal hydride battery
Charger Type : DLE1833A
Input Voltage for Charger : 100-240 V AC, 50/60 Hz
Charging Time : 4 hours
Standard Accessories : Bit Joint (DLW4360)
Spring for Joint (DLW4660)
Available as option : Bit Joint (DLW4340, DLW4350)
Screw Joint (DLW4430, DLW4530)(*1)
Soft Joint (DLW4000)

Applicable Screwdriver
- DLV7100/7200/8100/8200, DLV7500/8500, DLV3100(*2),
DLV30A/45A, DLV30S/45S, DLV16, DLV7104/8104/8204,
DLV30A/45A (automation), DLV45C

(*1): DLW4530 must be used at 5 Nm [44.3 lbf.in] or less.
(*2): A reversible screwdriver is required to loosen the measuring joint. Screw joint is required.

Bài viết Torque Checker DLT1673A 100-230V CE đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

Model : DLT1173A
Measurement Range : 0.015-1.500 Nm [0.13-13.3 lbf.in]
Calibration Presision : Within -0.5% or +0.5% (Full Scale)
For 0.2 Nm [2 lbf.in] or less -1 or +1 digit
Display : 4-digit digital display (Signal-line)
Data sampling : 1000 times/sec.
Display rate : 12 times/sec.
Measuring Unit : kgf / cm, Nm, lbf.in (selectable)
Data Memory : 800 pieces of data
Measuring Direction : CW and CCW
Measuring Mode : 3 modes : PD-TR-PP
Auto Power Off : Power off if left untouched for 10 minutes
External Output : As per USB out
Mitsutoyo Digimatic
Analog Output
: Approx. 1.5 V max.
No zero offset; indentical waveforms produced in PP, PD and TR models
Continuous Operation Time : 20 hours
External Dimensions (mm[inch]) : W160 x D110 x H47
[W6.3" x D4.33" x H1.85"]
Mass (g[lbs]) : 1100 [2.43]
Rechargeable Battery : Nickel metal hydride battery
Charger Type : DLE1833A
Input Voltage for Charger : 100-240 V AC, 50/60 Hz
Charging Time : 4 hours
Standard Accessories : Screw Joint (DLW4430)
Available as option : Bit Joint (DLW4330, DLW4340, DLW4350)
Spring (DLW4660)

Applicable Screwdriver
- DLV3300 (*1), DLV5700, DLV5800, DLV7300, DLV7000/8000
DLV7400A, DLV02/12, DLV04C/10C

(*1): A reversible screwdriver is required to loosen the measuring joint.

Bài viết Torque Checker DLT1173A 100-230V CE đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

For Torque Checker
- DLT1173A : Available as option
- DLT1673A : Unsupported
- DLT1973A : Unsupported

Bài viết Bit Joint DLW4330 for DLT1173A đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

Bài viết Spring DLW4660 for DLW4340, 4350, 4430 đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

For Torque Checker
- DLT1173A : Unsupported
- DLT1673A : Unsupported
- DLT1973A : Standard accessory

Bài viết Soft Joint Assy DLW4000 for DLT1673A, DLT1973A đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.

For Torque Checker
- DLT1173A : Unsupported
- DLT1673A : Available as option
- DLT1973A : Unsupported

*DLW4530 must be used at 5 Nm [44.3 lbf.in] or less.

Bài viết Measuring Joint DLW4530 for DLT1673A đã xuất hiện đầu tiên vào ngày nitto-kohki.vn.