DLV30A20A-M(AAJ) 100V AC Non-CE

For automatic assembly robot
– Three series of screwdrivers can be mounted on the XY robot
– Automatic screw tightening achieves a labor-saving or unattended process
– Long-life brushless motors are incorporated in the electric screwdrivers
– Standard coupling, flange coupling, and left-hand thread coupling are available for installation
– The electric screwdriver generates the torque-up signal
– The screwdrivers can be connected to a sequencer to control starting, forward rotation, and reverse rotation
– An electrical noise preventive measure is employed to avoid malfunction. Each input/output signal is insulated from a screwdriver’s internal circuit by a photocoupler.

High speed, Coupling with M41 screw
Model : DLV30A20A-M(AAJ)
Input Voltage : 100 V AC, 50/60 Hz
Torque (Nm [lbf.in])
Low Torque Spring (standard accessory): 0.4-1.6 [3.5-14.2]
High Torque Spring (built-in) : 1.2-3.0 [10.6-26.6]
Free Speed (min-1) : 2000
Screw Size (mm)
Machine Screw : 2.6 – 3.0
Tapping Screw : 2.5 – 4.0
Bit Type : OD 5 mm Hex. shank (*1)
Power Consumption (W) : 45
Mass (g[lbs]) : 740 [1.63]
Starting Method : External input signal
Input Signal :Start signal/forward signal/reverse signal(5-24V DC)
Output Signal:Torque-up signal (Voltage under 30V DC & current 20 mA)

(*1): DLV30A is available upon request for use with 6.35 mm hex. shank bits.