DLV70A06A-M(AAK) 100V AC Non-CE

For automatic assembly robot
– Three series of screwdrivers can be mounted on the XY robot
– Automatic screw tightening achieves a labor-saving or unattended process
– Long-life brushless motors are incorporated in the electric screwdrivers
– Standard coupling, flange coupling, and left-hand thread coupling are available for installation
– The electric screwdriver generates the torque-up signal
– The screwdrivers can be connected to a sequencer to control starting, forward rotation, and reverse rotation
– An electrical noise preventive measure is employed to avoid malfunction. Each input/output signal is insulated from a screwdriver’s internal circuit by a photocoupler.

Low speed, Coupling with M41 screw
Model : DLV70A06A-M(AAK)
Input Voltage : 100 V AC, 50/60 Hz
Torque (Nm [lbf.in]) : 3.8 – 7.0 [33.6 – 62.0]
Free Speed (min-1) : 650
Screw Size (mm)
Machine Screw : 5.0 – 8.0
Tapping Screw : 4.5 – 6.0
Bit Type : OD 6.35 mm Hex. shank
Power Consumption (W) : 45
Mass (g[lbs]) : 820 [1.81]
Starting Method : External input signal
Input Signal :Start signal/forward signal/reverse signal(5-24V DC)
Output Signal:Torque-up signal (Voltage under 30V DC & current 20 mA)