MULTI CUPLA MALC-HSP TYPE MALC-1HS STEEL FKM

A single operation enables simultaneous connections of multiple lines.
A special design minimizes air admixture in fluid lines upon connection.
Suitable for highpressure hydraulic circuits.

-Compared with conventional Multi Cuplas, approximately double flow rates are realized.
This could reduce the size of required plates.(Rate of flow increase depends on Cupla sizes.)
-The MALC type realizes a 2 mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6 mm.
-Special valve design enables connection of socket and plug under dynamic pressure of up to 8 MPa.
-When connected, the distance between the socket plate and plug plate is designed to be 30 mm for all sizes. This means any size of Cupla can be mounted and used on the same plate.
-Low spill valves minimize outflow of fluid and admixture of air into the fluid line.