MULTI CUPLA MALC-HSP TYPE MALC-8HP STEEL FKM

A single operation enables simultaneous connections of multiple lines.
A special design minimizes air admixture in fluid lines upon connection.
Suitable for highpressure hydraulic circuits.

-Compared with conventional Multi Cuplas, approximately double flow rates are realized.
This could reduce the size of required plates.(Rate of flow increase depends on Cupla sizes.)
-The MALC type realizes a 2 mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6 mm.
-Special valve design enables connection of socket and plug under dynamic pressure of up to 8 MPa.
-When connected, the distance between the socket plate and plug plate is designed to be 30 mm for all sizes. This means any size of Cupla can be mounted and used on the same plate.
-Low spill valves minimize outflow of fluid and admixture of air into the fluid line.

Basic information

Modal Name Product code Product No JAN code Group Name Subgroub name
MALC-8HP STEEL FKM CUPLA Quick Connect Couplings For Multi-Port Connection (Two-way shut-off; One-way shut-off)

Specification

Series Name
MULTI CUPLA MALC-HSP Type
Applicable Fluid
Hydraulic oil
Shape
Plug (Male)
Body Material
Steel
Seal Material
Fluoro rubber
Valve Struture
with valve
Characteristic
For bidirectional compressed
High flow rate
Reducing air ingress
Reducing liquid spillage
Working Pressure
0 ~ 21 MPa
End Configuration
Male thread
Size of End Configuration
M45 x 2
Working Temperature
-20 ~180 ℃

Reviews

There are no reviews yet.

Be the first to review “MULTI CUPLA MALC-HSP TYPE MALC-8HP STEEL FKM”

Your email address will not be published. Required fields are marked *

Close Menu

Search Product search

×

Cart